Roborock RockNeo Q105 robotic lawn mower, 2WD, 500 m², RTK + VSLAM, 22 cm cutting width, 2–6 cm height

The Roborock RockNeo Q105 is a 2WD robotic lawn mower designed for medium-sized lawns up to 500 m². It combines RTK positioning with VSLAM stereo vision to build AI-powered maps, avoid obstacles and manage multiple mowing zones. The mower offers a 22 cm cutting width, three blades and an adjustable cutting height from 2 to 6 cm. It includes a 4 Ah battery delivering up to 100 minutes of mowing per charge and requires about 95 minutes to recharge. The device is rated IPX6 for water resistance and supports features such as floating cutting deck, rear-wheel drive and optional edge-cutting and anti-theft modules.

Advantages

Roborock RockNeo Q105 provides precise navigation through RTK and stereo VSLAM, enabling accurate mapping and reliable obstacle avoidance. The 22 cm cutting width with three blades offers uniform cutting, while the adjustable height (2–6 cm) allows adaptation to different grass lengths. Long runtime per charge and relatively short recharge time increase operational continuity, and IPX6 water resistance supports use in wet conditions. Optional modules like edge cutting and anti-theft expand functionality for specific needs.

Suitable for

• Residential lawns up to about 500 m²
• Gardens requiring AI mapping and multi-zone management
• Areas with obstacles where stereo vision and obstacle avoidance are helpful
• Users who need a waterproof, weather-resistant robotic mower

When it may not be suitable

This mower may not be suitable for very large properties significantly exceeding 500 m², where a higher-capacity commercial mower would be more efficient. It also may not suit users who require integrated edge-cutting out of the box, since the edge-cutting module is sold separately.

Key specifications

• Recommended lawn area: 500 m²
• Drive: Rear-wheel drive (2WD)
• Cutting width: 22 cm
• Number of blades: 3
• Cutting height range: 2–6 cm (manual adjustment)
• Battery capacity: 4 Ah
• Mowing time per charge: up to 100 minutes
• Charging time: ~95 minutes
• Maximum slope: 45% (24°)
• Maximum obstacle height: 4 cm
• Water resistance: IPX6
• Navigation: RTK positioning + VSLAM stereo vision
• Special features: Floating cutting deck, AI-powered mapping, multi-zone management, anti-theft (optional)
• Warranty: 24 months

How to use

Install and charge the mower according to the manufacturer instructions before first use. Configure RTK/VSLAM setup and create mowing zones using the Roborock app or onboard interface, and install optional modules (for example edge-cutting) if required. Place the mower on the lawn, set the desired cutting height (2–6 cm), select mowing schedule or manual start, and allow the mower to map the area and perform cutting cycles. Monitor initial runs to confirm obstacle avoidance and zone coverage.

What to consider before purchase

• Property size — best suited to lawns up to 500 m²
• Edge-cutting module is sold separately if edge trimming is required
• Check maximum slope (45%) and obstacle height (4 cm) against your lawn conditions
• Confirm availability of RTK features and any optional connectivity (4G) for your location if needed

Usage recommendations

For reliable operation, perform an initial mapping run, remove or mark small obstacles higher than 4 cm, keep charging contacts clean, and schedule regular maintenance. Use the app to set no-go zones and multi-zone schedules to optimise mowing coverage for lawns up to 500 m².