Roborock Q7 TF+ robot vacuum cleaner, bagless, wet mopping, 0.2 L dust bin, 3200 mAh battery, 150 min runtime, 65 dB, RockDock Plus charging & purification

Roborock Q7 TF+ robot vacuum cleaner, bagless, wet mopping, 0.2 L dust bin, 3200 mAh battery, 150 min runtime, 65 dB, RockDock Plus charging & purification is a floor-care device that combines vacuuming and wet mopping with intelligent navigation. The robot delivers up to 10,000 Pa suction using HyperForce technology, uses LiDAR for 360° mapping and route planning, and returns automatically to the RockDock Plus base station for charging and automatic debris emptying and air purification. The unit is supplied in black and is intended for routine cleaning of hard floors and low-pile carpets.

Advantages

The Q7 TF+ provides a dual-function workflow: dry vacuuming plus wet mopping with three adjustable water flow levels for different surfaces. A 3200 mAh battery supports up to 150 minutes of continuous operation, while the PreciSense LiDAR navigation creates accurate maps to reduce missed areas and repeated passes. The robot includes hair-resistant brush design and a vibrating mop system to help remove stubborn dirt from hard floors. Automatic emptying into the RockDock Plus sealed dust bag reduces the frequency of manual maintenance.

Suitable for (tasks / use cases)

• Daily vacuuming of hard floors (tile, wood, laminate) with optional wet mopping
• Cleaning of homes with pets where hair is present thanks to anti-tangle brushes
• Multi-room apartments where LiDAR mapping and scheduled cleaning are useful
• Households that prefer automated emptying and reduced manual dust disposal

When it may not be suitable

This robot is not intended to replace deep manual cleaning for heavily soiled or cluttered areas; it performs best in maintained spaces. Users with many high-pile or thick-pile carpets should avoid using the wet mopping function over carpeted areas, and may prefer dry-only mode for carpeted rooms.

Key specifications

• Suction: up to 10,000 Pa (HyperForce)
• Dust bin (robot): 0.2 L
• Water tank (robot): 280 ml with 3-level water flow control
• Battery: 3200 mAh, up to 150 minutes runtime
• Navigation: PreciSense LiDAR 360° mapping
• Noise level: approximately 65 dB
• Cleaning modes: dry, wet, or combined
• Brush system: dual anti-tangle main and side brushes, JawScrapers design
• Mop system: VibraRise® 2.0 vibrating mop with removable base
• Base station: RockDock Plus automatic emptying and air purification
• Color: Black

How to use

Place the RockDock Plus charging and purification base on a level surface with sufficient clearance for robot approach. Install the robot’s water tank and mop if wet cleaning is required and select the desired water flow level in the app or on the device. Use the Roborock app (requires 2.4 GHz Wi‑Fi) to create a map, schedule cleaning sessions, set no-go zones and carpet areas, and monitor status and battery level. After cleaning cycles the robot will return to the base to recharge and, if connected to RockDock Plus, automatically empty its internal dust bin.

What to consider before purchase

• Check floor types in your home: use dry mode for most carpets and wet mode for hard floors
• Ensure your home Wi‑Fi network supports 2.4 GHz for app connectivity
• Plan for base station placement with clearance and a nearby power outlet
• Consider the small internal dust bin capacity (0.2 L) which relies on the base station for extended autonomous operation

Usage recommendations

Run scheduled cleaning when rooms are reasonably free of cables, small objects and dense clutter; regularly replace or empty the RockDock Plus dust bag per manufacturer guidance and clean the brushes to maintain optimal performance.